Area Of Usage Industry

Area Of Usage Industry

MIT, one of the most known and preferred brands of Turkey, has been continuing creating new ideas and developments to improve plate heat exchanger quality.

Cooling Rolling Press Oil:
In bloomers, used oil becomes hot and loses its lubricant function, and production performance goes down. To keep the bloomer’s oil at an optimum temperature, MIT Plate Heat Exchangers can be used. With cooling towers, chiller circuits and simple automations which are connected to heat exchangers’ seconder circuits, rolling press oil maintains at the desired temperature and the plant works with maximum efficiency.

Cooling Borax Oil:
Borax oil is one of the corner stones of industry, it is in the heart of the machining system. Quality and temperature of borax oil is very important to get maximum performance from the cutting edge and to reach maximum cutter life. If cooling tower or chiller is used with MIT Plate Heat Exchangers would enable borax oil to be kept in an optimum temperature, in order to get maximum efficiency.

Cooling Group Cycle:
In today’s world, cooling towers are the most common cooling source to meet the cooling demand in industrial facilities. These towers can be either open, close, or both. In open towers, some amount of solid particles mix with water and this water can not be sent back to the system that will be cooled directly. By using MIT Plate Heat Exchangers between the system and the open tower, the system is separated as two circuits and MIT Plate Heat Exchangers take the whole risk. In due course, if the heat exchanger gets dirty, it can be cleaned easily and so the system can work with the same performance again.

Chiller Group Circuit:
Generally, it is not enough to use a cooling tower in such situations that very low temperature water needed. That’s why chillers are preferred in that kind of applications. Chiller groups are very sensitive, expensive devices, and it is really hard to fix them, in a critical situation, serious damages may occur. MIT Heat Exchangers separate the system and chiller circuit in order to make them work independent of each other.

Waste Heat Recycle:
In industrial facilities, there are a lot of heat sources that go in vain such as rotten steam, hot water that returns without washing the fabric. At the same time, there are some applications which require heat, like utility hot water production and office heating. If you use MIT Plate Heat Exchangers to transfer available heat sources to heat needed areas, you do not waste your heat, and you do not have to pay extra cost for your heat requirement as well. Nowadays, the competition in production has been greatly increasing.

The most important factor about relieving companies is to decrease expenses. Energy expenses is one of the biggest components, it is very significant for everybody. Therefore, wasting is unacceptable. If we make a rough calculation, a heat exchanger used for heat recycle will amortize itself in 3-6 months and start to make your company more profitable.